Tested PLA: 3Dee (by 3Dee). Color of the filament in test: D52 Brown. The experiment can be seen in this video: https://youtu.be/L9tNhfxs9BU
Official recommended printing temperatures:
Tmin | Tmax |
195 °C | 215 °C |
383 °F | 419 °F |
Test specimens are printed at 210°C (410°F)
Testing method is described on this page. In most cases the break load is measured (in kg).
Test type | Value | Icon |
---|---|---|
Tensile (pulling) test | 92.3 kg | 8 |
Layer adhesion | 48.6 kg | |
Impact test | - | I |
Shear stress | - | m |
Bending | - | |
Torque (twist) | - | |
Elasticity test | - |
Images (spool, temperature tower, Benchy..):
3dee 3Dee 3Dee https://youtu.be/L9tNhfxs9BU 195 215 210 D52 Brown 92.3 48.6 - - - - - x