MyTechFun.com

Ultimate comparison: Polymaker PolyLite filaments (PLA, PETG, ABS, ASA, PC)

Title: Ultimate comparison: Polymaker PolyLite filaments (PLA, PETG, ABS, ASA, PC). Watch on youtube: https://youtu.be/HMXTeuhShaA

Tags: 3dprint, filament test, polymaker,

This is a comparison video, mainly mechanical and temperature tests of the PolyMaker PolyLite line: PLA, PETG, ABS, ASA and PC (PolyCarbonate). Materials used in the video:
PLA: https://us.polymaker.com/products/polylite-pla?aff=49
PETG: https://us.polymaker.com/products/polylite-petg?aff=49
ABS: https://us.polymaker.com/products/polylite-abs?aff=49
ASA: https://us.polymaker.com/products/polylite-asa?aff=49
PC: https://us.polymaker.com/products/polylite-pc?aff=49

I know the video is long, but this was a very big work and it is hard to make it shorter. If you like my work you could support me:
Patreon: https://www.patreon.com/mytechfun
By me a Coffee: https://www.buymeacoffee.com/mytechfun
PayPal link: https://www.mytechfun.com/donation
Or just share this video on social networks. Thank you!

All test specimens are 3D printed on Ender-3 V2 equipped with MicroSwiss all metal hotend and WhamBam PEX flexible sheet. More about creep test: https://youtu.be/88pk2cNOeGE
Creality Enclosure: https://www.banggood.com/custlink/3KKEFjewOn

Results (Excel table) can be downloaded from the link at the bottom of this page.

Contents:
0:00 Introduction
1:28 About PolyLite filaments
3:35 3D printing PLA
6:08 3D printing PETG
8:05 3D printing ABS
10:39 3D printing ASA
12:01 3D printing PC
14:32 Temperature towers
15:10 Tensile test
16:09 Layer adhesion test
17:00 Shear stress test
17:58 Bending test
19:11 Torque (twist) test
20:26 Izod impact test
22:00 Temperature test
23:26 Hardness
24:05 Creep test (C-bending)
27:19 Creep test (screw)
30:28 Results
34:26 Conclusions

#polymaker #polylite #3dprinting

Download files:

polylite.xlsx 58.1 kB